Mishimoto 90-93 Mazda Miata Silicone Hose Kit, Black

Mishimoto 90-93 Mazda Miata Silicone Hose Kit, Black

Mishimoto 90-93 Mazda Miata Silicone Hose Kit, Black

SKU: MMHOSE-MIA-90BK
×
×
Brand: Mishimoto
Retail:
Retail: $155.00
Your Price:
$138.00 (You save $17.00)
Free Shipping
Quantity:
Quantity:
New In stock
  • Product Description

    Mishimoto silicone radiator hose kits and silicone couplers will provide your engine with a one-of-a-kind advantage in performance and style. Mishimoto silicone hose kits are made with a dual layer, combining high-grade silicone and heat-resistant embedded fibers, which will provide exceptional and efficient heat reduction, increased pressure tolerance, and a lifetime of satisfaction. Mishimoto silicone hose kits are a direct OEM fit. They are available in black, blue, red to enhance the aesthetic appeal of any engine bay – a perfect match for our racing radiator products.

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Product Videos

    • How To Install: 1990-1993 Mazda Miata Silicone Hose Kit
      Product page: http://mishimo.to/1VUdgVl Facebook: http://www.f...

    How To Install: 1990-1993 Mazda Miata Silicone Hose Kit

    Product page: http://mishimo.to/1VUdgVl Facebook: http://www.facebook.com/GoMishimoto Twitter: http://www.Twitter.com/Mishimoto Instagram: http://www.Instagram.com/Mishimoto Mishimoto, the world leader in performance cooling products, shows you how to install the Mishimoto Silicone Coolant Hose Kit in a 1990 Mazda Miata! These reinforced silicone hoses will stand up against the tests of time, adding a level of cooling and protection your old stock hoses just can't compete with! Model Number: MMHOSE-MIA-90 Mishimoto Silicone Hose Kit Installation Guide PARTS LIST (2) Mishimoto Silicone Heater Hoses TOOLS NEEDED Ratchet Wrench 10mm Socket 12mm Socket Ratchet Extensions Phillips Screwdriver Flathead Screwdriver Lineman's Pliers Coolant Coolant Drain Pan Coolant Funnel Jack & Jack Stands Disclaimer • Please dispose of any liquids properly. • Allow vehicle to cool completely prior to attempting installation. • Mishimoto Performance (MP) is not responsible for any vehicle damage or personal injury due to installation errors, misuse, or removal of MP products. • MP always suggests that a trained professional install all MP products. • Do not run the engine or drive the vehicle while overheating. Serious damage may occur. • Raise vehicle only on jack stands or on a vehicle lift. INSTALLATION INSTRUCTIONS ( 1 ) REMOVING THE OEM UPPER & 1ST LOWER RADIATOR HOSES 1. Using a jack, securely support the vehicle on jack stands or use a vehicle lift. Disconnect the negative terminal from the battery. (Located in the trunk). 2. Using your phillips screwdriver, remove the coolant drain plug located in the center of the vehicle, below the radiator. Drain all coolant from the vehicle, using a drain pan to catch all used coolant. Removing the radiator cap will aid the draining process. 3. Disconnect and remove the upper radiator hose by unscrewing the two hose clamps securing it. 4. Unbolt and remove the splash shield under the vehicle to access the first lower radiator hose. Using your pliers, loosen the two spring clamps securing the hose and remove the hose from the vehicle. 5. Working with care, carefully remove the factory heater hose on the right from the vehicle. ( 2 ) REMOVING THE OEM AIR BOX & 2ND LOWER RADIATOR HOSE 1. To access the second lower radiator hose, the air cleaner must first be removed. Begin by disconnecting the mass airflow sensor connection. Using your flathead screwdriver, remove the two wire clips securing the sensor connection. 2. You will need to remove the intake tubes from the air cleaner. Using your 10mm socket, loosen the hose clamps on each tube, and loosen the 10mm bolt on the rear tube near the fender. Disconnect the tube from the fender area, and unhook the inner intake tube. 3. Loosen the three 12mm bolts securing the air box, and remove the entire air box from the vehicle. This will expose the lower radiator hose that needs to be removed. 4. Loosen the two spring clamps securing the second radiator hose, and remove it from the vehicle. ( 3 ) REINSTALLATION OF THE OEM AIR BOX & MISHIMOTO 2ND LOWER RADIATOR HOSE 1. Attach the Mishimoto second lower radiator hose, making sure to slide the supplied T-bolt clamps on with the hose. Secure the hose by tightening the 10mm bolts on the clamps. 2. Reinstall the air box and OEM intake tubes by doing steps 2.1-2.3 in reverse. Make sure to securely tighten the 10mm bolts on the intake tubes, as well as the 12mm nuts on the air box. 3. Reconnect the mass airflow sensor connection. ( 4 ) INSTALLATION OF THE MISHIMOTO UPPER & 1ST LOWER RADIATOR HOSES 1. Attach the Mishimoto silicone lower radiator hose, again using the supplied T-bolt clamps. Securely tighten the 10mm bolts on the hose. Reinstall the splash shield under the vehicle. 2. Attach the Mishimoto upper radiator hose, once again using the supplied T-bolt clamps. Securely tighten the 10mm bolts on the clamps. ( 5 ) COOLANT REFILLING & INSTALL COMPLETION 1. It is now time to refill the vehicle with coolant. Screw the coolant drain plug back in if you have not done so already. Insert the funnel into the filler neck of the radiator and begin to pour a 50/50 mix of coolant and distilled water. While filling, it is a good idea to pump the upper radiator hose to remove any last bit of air in the system. 2. Reinstall the radiator cap and reconnect the negative terminal on the battery and start the vehicle, making sure the vehicle is in neutral or park. 3. With the vehicle running, turn the hear on high. Monitor the temperature gauge to make sure the vehicle does not overheat. 4. Using a jack, raise the vehicle, remove the jack stands and lower the vehicle, or lower the vehicle on the lift you were using. Download the guide here: http://lib.store.yahoo.net/lib/yhst-62631657248580/MMHOSE-MIA-90-install-guide.pdf
  • Manufacturer Insight

    Mishimoto Automotive is the leading manufacturer of aftermarket performance cooling products. Our company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. Our staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.

    WHY MISHIMOTO?
    At Mishimoto, you never have to worry about the quality of the product you are installing. With eight years of experience in the automotive cooling industry and a growing team of talented technicians, Mishimoto can guarantee a product that will meet your needs and your standards.

    FITMENT
    Racing radiators, aluminum fan shrouds, silicone hose kits, air diversion plates, oil cooler kits, and more Ì´Ì_ÌÎ̝ÌÎÌ¥ each Mishimoto product is carefully designed for a clean, direct OEM fit for easy installation.

    QUALITY
    Mishimoto products are rigorously tested: Our radiators provide up to 25% greater cooling capacity over stock units. You can feel confident knowing that Mishimoto radiators are crafted with meticulous standards using high-quality materials, and they are pressure tested twice for maximum reliability.

    APPEARANCE
    Mishimoto radiators have a polished aluminum finish and high-quality TIG welds that enhance the appearance of your engine bay. Our silicone hoses, couplers, and accessories are available in an array of colors that will add style under your hood.

    PEACE OF MIND
    With a limited lifetime warranty from the date of purchase, including accident protection for cars and trucks, we guarantee 100% satisfaction with our products and service.

×
×