LED License Plate Light - Scion FR-S / Subaru BRZ

Upgrade the lighting in your Scion FR-S / Subaru BRZ trunk with a full LED license plate light replacement kit! 

License plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescant, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your vehicle! 

The installation is 100% plug-and-play, just replace your factory bulb.

With low price and easy install, this is one of the best, easiest modifications you can do to improve how your car looks at night.

BULB DESIGN

STAGE ONE: Compact design, with one 5050-size Epistar SMD chip. Outputs at 180 degrees.

STAGE TWO: Similarly compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.

STAGE THREE: Each of the four sides of this bulb contains one 5050-size Epistar SMD chip, and the top is fitted one more, for full-coverage, non-directional output and high brightness.

Fitment. All bulbs use a quality inject-molded 194/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.

Included in your order is TWO BULBS.

Installation

Just unplug your factory bulb, and replace it with the new LED one. It is a direct replacement for your vehicle.

Accessing the bulb itself is quite easy. Usually, it is held in by two tabs, and you can pop it out from the outside of the vehicle. In some cases, you will need to remove a few screws, which are clearly visible. Finally, it may be held by clips from the inside, accessible when you open the hatch or trunk.

If it does not work the first time, try flipping it around in the socket, as all LEDs require the correct polarity.